Metal Maslow with Makita Router
This is a kit which is a derivative of the orginal wooden maslow at www.maslowcnc.com. It includes the following components:
Makita RT0701C router 110V with 1 year warranty (DO NOT BUY IF YOU NEED 220V VERSION!)
200mm C-Beam Axis with 8x faster Z axis motor mount and clamp for above router.
Laser Cut Steel Base plate so ring, router, z axis etc. lines up exactly. Thicker rotation ring with bearings and chain attachment hardware.
Longer 14’ plated #25 chain (very rust resistant) which can be used to widen the motor spacing.
TLE5206 Power Control Board with AUX pins and fan cooled enclosure. with removeable dust fiters.
Pulleys for counter weighting the slack chain side instead of elastic cord.
Arduino controlled power switch & aux cable for automatic on/off of router (One should still never leave machine unattended)
AUX cable and metal plate for Zeroing the z axis
Larger 12V power supply with two extra 6amp leads for powering optional led shop lights or other gadgets.
Some starter router bits so you can get cutting as soon as possible.
Cables for connecting all motors to the Arduino motor shield.
*Please note all electrical wall plugs are USA 2 prong style. Other countires will most likely need to use conversion adapters.