0 items / $0.00

Metal Maslow CNC kit & Router & Clamp $100 rebate for making youtube videos.

$580.00

Image of Metal Maslow CNC kit & Router & Clamp $100 rebate for making youtube videos.
  • Image of Metal Maslow CNC kit & Router & Clamp $100 rebate for making youtube videos.
  • Image of Metal Maslow CNC kit & Router & Clamp $100 rebate for making youtube videos.
  • Image of Metal Maslow CNC kit & Router & Clamp $100 rebate for making youtube videos.

This is a complete kit, you only need a computer and to make the wooden frame to get going. We are offering up to $100 rebate for helping us make youtube videos about any project you make.* See below

https://www.youtube.com/watch?v=pQ4w3-PELbE
assembly instructions. Pleases note we now have a flat z axis motor plate that is adjustable. there might be other minor changes to the kit as we constantly like to improve it.

This is an improved kit vs the original Maslow cnc concept.
And has the following benefits:
Includes Factory Refurb Router with 1 year warranty which might have cosmetic flaws, but works and is warrantied for 1 year just like a new one.
C-Beam Axis with faster Z axis motor mount
Laser Cut Steel Base plate so everything lines up exactly. linkage kit. (please note base is spray painted to prevent rust, but paint job is not perfect).
Longer 14’ plated #25 chain (very rust resistant) which can be used to widen the motor spacing.
TLE5206 Power Control Board with AUX pins and fan cooled white plastic enclosure.
Pulleys for counter weighting the slack chain side instead of elastic cord.
Arduino controlled power switch & aux cable for automatic on/off of router (One should still never leave machine unattended)
AUX cable and steel ruler for Zeroing the z axis

Starter router bit.
All power cords are standard USA double prong. If you live outside the USA you will have to buy adapters.
YOU WILL NEED TO SUPPLY MATERIALS TO BUILD A VERTICAL WOODEN FRAME, TWO MILK JUGS OR 2 LITER BOTTLES AS COUTER WEIGHTS AND OTHER PARTS. THIS IS A DIY KIT AND IS NOT COMPLETE.

INTERNATIONAL ORDERS: YOU WILL HAVE TO USE WWW.MYUS.COM OR SIMILAR PACKAGE FORWARDING SERVICE. THE BOX IS 12X12X6" AND IS 30lbs LBS. If you want to save alot on shipping we can remove the laser cut base plate which will drop total weight down to about 16 lbs and ship medium flat rate box for $60 to many major markets. WE WILL SHIP THE BOX TO THE USA WARE HOUSE AND THEN THEY WILL FORWARD IT TO YOUR COUNTRY.

the kit comes with all the components the original kit came with like 3 motors, Arduino and motor shield and all the nuts and bolts to assemble.

Since our motor is faster than the original please use the following settings:
4200 encoder and 14 pitch (assuming 2mm pitch, if 8mm then it would be 56pitch)
Other people have made it go even faster by multiplying by 10 so
6000 encoder and 20mm pitch.

The encoder count settings and pitch need to be entered in the hidden advanced settings menu.

If you are using the new beta makerverse software please contact us for good values.

*. To qualify for the rebate you must meet the following terms:
Youtube videos must be made within 3 months of receiving the kit.
1st video is $40 rebate, 2nd video $30 rebate, 3rd video is $30 rebate. Limit of $100 in rebates per complete kit with router bought.
Video must be between 5 to 30 minutes long and be about a project done on our machine. and have www.metalmaslow.com website link in description of the video. They do not have to be professionally made, (smart phone is fine) but must have decent audio, lighting, & no excessive shake.

Subscribe to our mailing list

* indicates required
/ ( mm / dd )