0 items / $0.00

Aluminum Clamp for R2200 3 5/8" dia router or any 3.5" dia router.

$35.00

Image of Aluminum  Clamp for R2200 3 5/8" dia router or any 3.5" dia router.
  • Image of Aluminum  Clamp for R2200 3 5/8" dia router or any 3.5" dia router.
  • Image of Aluminum  Clamp for R2200 3 5/8" dia router or any 3.5" dia router.

This is an aluminum welded clamp which is ONLY sold with the routerless kit. Any orders for the clamp alone will be cancelled. Please specify which router you will be using under options below. There are many routers that use 3.5" diameter aluminum shafts, but they might have rack gears, alignment pins or other protrusions that prevent a smooth fit, so you might have to remove these for a good fit. For 3.5" diameter routers we will include some 1/16" plastic shims for a snug fit. You may have to use additional shim material for a snug fit.
we recommend using smaller palm routers over these bigger routers because the extra power is not needed and raises the center of gravity. The Ridgid R2002 router has a lifetime warranty (if registered) and will fit, we will make a slot for the small alignment pin to pass through if using that model
PLEASE NOTE THIS IS A MILL FINISH ALUMINUM. IT HAS SCRATCHES, AND OTHER COSMETIC ISSUES BUT WORKS FINE. Power coat/anodize or paint would of just raised the price.
Back has 4 tapped holes for 1/4-20 screws to fit on a c beam access.

Subscribe to our mailing list

* indicates required
/ ( mm / dd )